Ncp500/100 - Hacsa Tel

Ncp500/100 - Hacsa Tel

KX-NCP1000 KX-NCP500 MPR V1.0 Not Not Final Final 25 Aug. 2008 Panasonic Communications Co., Ltd. Introduction -1 Network Communication Platform Panasonic Network Communication Platforms provide cost effective solutions for small to medium business Market. The solutions provide: Extensive business telephony communications over local and broadband Networks Enables Businesses to implement Unified Communications Provides feature rich mobility solutions Increases user and business productivity Reduces complexity and cost Introduction -2 Network Communication Platform The systems are designed for: Installation into standard IT equipment racks Supports a range of IP Telephone devices (MGCP, SIP) Digital, & Analogue Telephone devices Digital, Analogue & IP network connections Integrated Applications

System Hardware Comprises of Main Processor Card Power Supply (as standard) Standard 19 Rack Installation Concept -1 TDA MPR5 TDE MPR2 NCP MPR1 Same function level TDE: Facilitated smooth migration from TDA to Full IP-PBX NCP: Easy maintenance for Telecom and IT dealers Provides scalability suited to the users environment Profitable business model for dealers by providing applications Unified Communication Application (w/ Communication Assistant: CA) Concept -2 IT oriented design All RJ-45 Connector New D-PT KX-DT3xx 19-inch rack oriented design (New design) RJ-45 Connector Built-in Communication Assistant (CA)

PCC proprietary 1st Party CTI Application. Basic System Construction KX-NCP Line-up KX-NCP500 KX-NCP1000 KX-NCP500/1000 Build-in Power Total Number of Trunks Physical Trunk Card Virtual Trunk Card Total Number of Ext. Physical Ext. Card Virtual Ext. Card 72 64 8 68 28 40 Total Number of Trunks Physical Trunk Card Virtual Trunk Card Total Number of Ext. Physical Ext. Card Virtual Ext. Card 96 64 32

108 44 64 System Capacity Type and Maximum Number of Slots Slot Type IPCMPR Card Slot Regular Free Slot Small Free Slot Virtual Trunk Virtual Slot Virtual Ext. (MPR) A A KX-NCP500 B Maximum Number NCP500 NCP1000 1 1 2 3 3 4 2 4 3 4

A B A B C C B C A. Small Free Slots B. Regular Free Slots C. IPCMPR Card Slot KX-NCP1000 C Block Design Small Free Slots Regular Free Slots NCP500 3slots NCP1000 4slots MPR Card NCP500 2slots NCP1000 3slots

Daughter board SLC8 w/ CID SLC16 w/ CID DHLC4 w/CID LCOT4 w/CID BRI2 PRI30 DSP4/16/64 Analogue RMT Built-In LAN RJ45 Maintenance RJ45 RS-232C D-SUB - SD memory slot - ESVM2 DLC8 DLC16 OPB3 DPH2(G MSG4 DPH4 ESVM2/4 EIO4 ECHO16 T1 E1 Slot Configuration DHLC4 LCOT4 BRI2

PRI30/23 DLC8/16 SLC8/16 T1/E1 OPB3 OPB-3 Daughters Slot1 Daughters Slot2 Daughters Slot3 DPH2(G) MSG4 ESVM2 DPH4 ESVM4 EIO4 ECHO16 Free Slot 4 Free Slot 7 Free Slot 3 Free Slot 6 Free Slot 3 Free Slot 6 Free Slot 2 Free Slot 5 Free Slot 2

Free Slot 5 Free Slot 1 NCP1000 MPR Free Slot 1 NCP500 MPR Slot Configuration NCP1000 Free Slot 4 Free Slot 7 Free Slot 3 Free Slot 6 Free Slot 3 Free Slot 6 Free Slot 2 Free Slot 5 Free Slot 2

Free Slot 5 Free Slot 1 MPR Daughter Slot ( MPR Card ) Built-in DSP slot ESVM-2 RMT slot Virtual Slot V-IPEXT32 V-SIPEXT32 V-IPGW16 V-SIPGW16 VoIP Extension Slot 1 VoIP Extension Slot 2 VoIP Extension Slot 3 VoIP Extension Slot 4 VoIP Trunk Slot 1 VoIP Trunk Slot 2 VoIP Trunk Slot 3 VoIP Trunk Slot 4 NCP500 Free Slot 1 MPR Daughter Slot ( MPR Card ) Built-in DSP slot ESVM-2 RMT slot

Virtual Slot VoIP Extension Slot 1 VoIP Extension Slot 2 VoIP Extension Slot 3 VoIP Trunk Slot 1 VoIP Trunk Slot 2 View Free Slot 7 Free Slot 3 Free Slot 6 Free Slot 2 Free Slot 5 Free Slot 1 VoIP-DSP MPR NCP500 86mm Free Slot 4 Free Slot 3 Free Slot 6

Free Slot 2 Free Slot 5 Free Slot 1 FAN back 128mm 19-inch rack oriented design NCP1000 VoIP-DSP FAN PSU PSU connector connector connector connector Small slot Regular slot Front Regular slot

Back board 340mm Back board Small slot MPR 430mm 430mm System Specification System Hardware Specification -1 Power Input NCP500 Power Input NCP1000 Maximum Power Consumption Memory Back-up duration Dialling: CO Trunk/Extension Mode Conversion Paging Output External Voice Input (MOH) Ringing frequency Central Office Loop Limit Operating environment Temperature Humidity AC100 ~ 130V / AC200V ~ 240V Max. 122VA

AC100 ~ 130V / AC200V ~ 240V Max. 142VA NCP500 NCP1000 51W (175BTU) 65W (222BTU) 7 years DP (10pps, 20pps), DTMF DP -> DTMF, DTMF -> DP 1 Jack 1 Jack 20Hz or 25Hz (Country / Area dependant) 1600 Ohms max. 0 ~ 40 C, 32 ~ 104 F 10 ~ 90% System Hardware Specification -2 Conference Trunk MOH (Music On Hold) 32 Conference Trunk (3 party x 10 ~ 8 party x 4) 1 port, internal/external selectable, level control 6dB ~ +6dB Internal Paging Level control -6dB ~ +3dB External Paging 1 port, volume control -15dB ~ +6dB Serial Interface Port RS232C, D-Sub9, 1 port (115.2kbps) Built-in battery back-up No External battery back-up No Dimension NCP1000: 430(W) x 128(H) x 340(D)mm NCP500: 430(W) x 86(H) x 340(D)mm

Weight (Full configuration) NCP1000: 7.5kg NCP500: 6.5kg System Capacity -1 Maximum Optional Service Cards System Max. Trunk Virtual Max. Max V-IPGW16 V-IPSIPGW16 Physical Max. LCOT4 BRI2 E1 or T1 PRI23 or PRI30 Ext. Slot Max. Virtual V-Max. V-IPEXT32 V-SIPEXT32 Physical DHLC4 DLC8 or DLC16 or SLT8 or SLT16 OPB3 NCP500 10 7 2 1 1 5 (*1)

3 3 2 2 5 3 2 1 1 1 2 *1) One T1, E1, PRI30, or PRI23 card counts as 2 cards. NCP1000 15 9 4 2 2 5 (*1) 4 4 2 2 7 4 2 2 1 2 3 System Capacity -2 Maximum Optional Service Cards on OPB-3

Type Name OPB3 DPH4 DPH2 EIO4 ECHO16 MSG4 ESVM2 ESVM4 NCP500 2 4 6 4 2 4 4 4 NCP1000 3 4 8 4 2 4 4 4 System Capacity -3

Maximum Trunks Name Total Number of Trunks Trunk (Physical Trunk Card) Trunk (Virtual Trunk Card) NCP500 NCP1000 72 96 64 64 8 32 System Capacity -3 Maximum Terminal Equipment Max. MPR Extension Legacy CS PS Voice Mail System Doorphone External Sensor External Relay Max. IP-PT Max. SIP Max. DPT APT SLT Max KX-TDA0158

KX-TDA0141 NCP500 68 40 32 28 24 4 20 4 2 4 64 2 16 16 16 *1) One TDA0158 counts as 2 x TDA0141. NCP1000 108 64 64 44 40 4 36 8 4 (*1) 8 64 2 16 16 16

System Main Features -1 Feature Required Key CA (Communication Assistant) - 1st Party CTI interface for LAN port NCS21xx NCS22xx NCS2301 NT321 - Basic feature NT3xx IP-PT with 4-Direction Key NCS32xx NCS35xx NT3xx Series IP-PT -Bluetooth support -Tilt LCD with white backlight NCS32xx NCS35xx System Main Features -2 Feature DSS BLF for Mobile Extension. Required Key NCS3910 Transfer Recall to VM Group

NONE Intercept for Call-FWD to CO NONE Auto recovery function for Busy-out (Analogue line) NONE Two CLIP on an Extension NONE Hotel feature enhancement Not Ready status is added. NONE System error activates an external relay NONE PRI CNIP with the name of each extension NONE System Main Features -3 Feature KX-TDA0158 (8ch-CS) VM-TDA Extension Number Expansion (8 digits) KX-TDA0192/4 (ESVM) - Moving From SVM to DISA (Supported) - High Quality OGM Record (Supported) - Wav file import from PC (Supported) Build-IN ESVM. - Moving From SVM to DISA (Supported) - High Quality OGM Record by handset. (Supported)

- Wav file import from PC (Not-Supported) T.38 UDP (H.323 IPGW FAX Signalling protocol support) Fax Forwarding (TDA30 Feature) - PBX ESVM(DISA) detects FAX signal and can transfer call to FAX Extension port. Required Key NONE NONE NONE NONE NONE NONE KX-NCS3910 Features NCS3910 Activation key is required to use the following features. Feature DSS BLF for Mobile Extension (when call is routed through PBX) Automatic Call Distribution (ACD) By using dummy PS Technique. - Network ICD Group - Outside Destinations in ICD Group (Mobile Integration) New - - PS Roaming by Network ICD Group DISA Call Transfer from Outside Destination DISA Automatic Walking COS Common Extension Numbering.

Network Direct Station Selection (N-DSS) Centralized Voice Mail Enhanced CTI function (Sending text message to PS) - Hardware Hardware - Main Unit (MPR Card) MODEL Summary Visual ICMPR NCP 500/1000 - One daughter slot for DSP4/16/64 - One daughter slot for Analogue RMT - Main Unit -Comparison with TDE100/200 MPR TDE NCP Built-in SVM Type: SVM -> ESVM MOH/Page: 2ch -> 1ch -PSU & Fan Built-in NCPS01 VoIP Encryption for IP-PT (NT Series) Compatible with NCP500/1000 only Encryption SD N/A

Hardware - DSP4 Model Summary NCP1104 - DSP4 VoIP channel card -4ch VoIP channels -G729A, G711 support -Built-in Activation Key 4IP-Trunk + 8IP-PT Visual Hardware - Small Free Slot Model Summary NCP1170 4 port digital hybrid extension card (RJ45) - DHLC4 -DPT, APT, SLT, DSS, CS(PT Interface) -Caller ID for SLT (FSK Only) -PFT port x1 to LCOT4 -DXDP is supported NCP1180 4 port analogue Trunk Card (RJ45) - LCOT 4 -Caller ID Detection (Built-in) -PFT port x1 to DHLC4 NCP1280 2 port BRI Card (RJ45) -Same BRI functionality as TDA0288) - BRI 2 - No PFT port NCP1290 1 port PRI Card (RJ45 No BNC) -Same PRI functionality as TDA0290) - PRI30 Hot-Swap is not supported.

Visual Hardware - Regular Free Slot Model NCP1171 (DLC8) Summary 8 port digital extension card (RJ45) - DPT, DSS, CS(PT Interface) - DXDP is supported NCP1172 16 port digital extension card (RJ45) - DPT, DSS, CS(PT Interface) (DLC16) - DXDP is supported NCP1173 8 port SLC Card (RJ45) - Caller ID for SLT (FSK), (SLC8) - No-Message Lamp Function. NCP1174 16 port SLC Card (RJ45) - Caller ID for SLT (FSK) (SLC16) - No-Message Lamp Function. NCP1190 Option Base Card (OPB3) - 3 daughter slots for DPH2/4, EIO4, MSG4, ESVM2/4, ECHO16 NCP1187 (T1) T1 Trunk Card (RJ45, no BNC) NCP1188 (E1) E1 Trunk Card (RJ45, BNC) Hot-Swap is supported.

Visual Hardware - Option cards -1 Common Card with TDE100/200 - Mounted on ICMPR Card Model TDA0196 - RMT Summary Analogue modem card (For Remote Access) -V90 support TDE0110 - DSP16 VoIP channel card 16 IP channel G729A, G711 support Built-in Activation Key 4IP-Trunk + 8IP-PT TDE0111 - DSP64 VoIP channel card - 64 IP Channel -G729A, G711 support -Built-in Activation Key 16IP-Trunk + 32 IP-PT

Hardware - Option cards -2 Common Card with TDE100/200 - Mounted on OPB Card Model Summary TDA0161 - DPH4 4 Doorphone / 4 DoorOpener TDA0162G - DPH2 2 Doorphone / 2 DoorOpener (Only for Germany) TDA0164 - EIO4 4 External relay / sensor TDA0166 - ECHO16 Echo Canceller TDA0191 - MSG4 OGM/DISA TDA0192 - ESVM2 2ch Enhanced Simplified VM Card

TDA0194 - ESVM4 4ch Enhanced Simplified VM Card Hardware Compatibility Hardware - Compatibility (Telephone) Model KX-NT3xx Series (IP-PT) KXNCS81xx (IP-Softphones) KX-DT3xx Series (New Digital PTs) KX-T7xxx Series (Old Digital/Analoge PTs) DSS Consoles (KX-T7640 Series etc) SLTs (KX-7710 etc) KX-NT265 IP-PT (V2.x) KX-TCA155/255/256/355/TD7590 (Portable Stations) KX-T30800 Series PTs and DSS Consoles KX-T61600 Series PTs and DSS Consoles KX-T123200 Series PTs and DSS Consoles KX-TD7500 DECT Portable Station KX-NT265 IP-PT (V1.x) KX-NT136 IP-PT Compatible with NCP YES YES YES YES YES YES YES YES NO NO NO

NO NO NO IP-Softphone (bundled in NCS81xx) requires IP-Softphone Activation Key Code (NCS32xx) for basic function, and NCS81xx license only for optional function. Hardware - Compatibility (CS/Other) Model Compatible with NCP TDA0141CE 2ch CS (DPT IF) YES TDA0142CE 4ch CS (CSIF) NO TDA0158CE 8ch CS (DPT IF) YES Model A228 S/M-type battery backup cable A229 L-type battery backup cable A258 Blank Slot cover T30865 Doorphone T7765 Doorphone Compatible with NCP NO NO

NO YES YES New PT (KX-DT300 Series) -Same design concept with NT300 series -TDA/TDE/NCP compatible -Apply for bluetooth headset (PBX MPR software enhance required.) New Lineup DT3xx DT346 DT343 DT333 None DT321 DT390 DT301 NT303 NT307 New Features Old Lineup T76xx Bluetooth T7636 T7633

T7630 T7625 T7667 T7668 T7640 T7601 T7603 - Features Tilt LCD LCD CO Headset Backlight key DXDP jack USB Yes Yes No - Yes Yes Yes - 6 line 3 line 3 line None Yes Yes

No - 24 24 24 24 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No 1 line No 12 Yes Yes

No - - 60 CO key DSS console USB module Add on 12 CO key module Bluetooth module Power Supply Unit Capacity Power Supply Unit Capacity -1 The pre-installed power supply unit (PSU) in each PBX supports a different load figure. Load Figure Main units Max PU NCP500 28 PU NCP1000 44 PU Load Figure Calculation Telephone Optional Card Other equipment DPT/DSS (T76xx, DT3xx) 1 DHLC4

4 TDA0141 4 T7560/T7565 1 SLC8 8 TDA0158 8 Other DPT/DSS 4 SLC16 16 ISDN Extension 2 APT 4 Other 0

VPS(1port) 4 IP-PT / SIP Ext 0 SLT 0 Power Supply Unit Capacity -2 If the total load figure exceeds the maximum load figure of the PBX by 3, the corresponding extension card cannot be supported by the PBX. Ex.1 NCP500 + 1 x DLC16 + 1 x DHLC4 +16 x DT3xx NCP500 DLC16 DHLC4 16 x DT3xx Free PU 28 PU - 0 PU - 4 PU - 16 PU 4 PU Another 4 x DT3xx can be connected. Ex.2 NCP1000 + 1 x DHLC4 + 1 x DLC16 + SLC8 + 32 x DT3xx NCP1000 DHLC4 DLC16

SLC8 32 x DT3xx Free PU No more D-TP can be connected 44 PU - 4 PU - 0 PU - 8 PU - 32 PU 0 PU Power Supply Unit Capacity -3 Ex.3 NCP1000 + 1 x DHLC4 + 1 x DLC16 SLC8 + 32 x DT3xx NCP1000 DHLC4 DLC16 SLC8 32 x DT3xx Free PU 44 PU - 4 PU - 0 PU - 8 PU - 32 PU 0 PU No more D-TP can be connected How many SLT can be connected ? Ex.4 NCP1000 + 1 x DLC16 x T7435/7535 x ? NCP1000 DLC16

? X T7435/7535 How many T7435/7535 can be connected? 44 PU - 0 PU ? DXDP All port of DHLC4/DLC8/DLC16 supports DXDP function. Its simply limited by - the exact number of connected DPT and , - max. number of DPT units ( NCP500 : 24 / NCP1000 : 40 ) NCP500 Small Free Slot Config.-1 Config.-2 Config.-3 Config.-4 Config.-5 DHLC4 - DHLC4 - DHLC4 Regular Free Slot - DLC8 DLC8

DLC16 DLC16 No. of DPT port 4 8 12 16 20 No. of DXDP Extension 4 8 12 8 4 Total No. of DPT Units 8 16 24(Max) 24(Max)

24(Max) NCP1000 Small Free Slot Config.-1 Config.-2 Config.-3 Config.-4 Config.-5 - DHLC4 - - DHLC4 Regular Free Slot (1) DLC16 DLC16 DLC8 DLC16 DLC16 Regular Free Slot (2) - - DLC16

DLC16 DLC16 No. of DPT port 16 20 24 32 36 No. of DXDP Extension 16 20 16 8 4 Total No. of DPT Units 32 40(Max) 40(Max) 40(Max)

40(Max) TDA/TDE MEC Features The NCP500/1000 does not have MEC Card Capacity, but the NCP500/1000 has some of MEC features. Feature NCP500/1000 TDA30 W/O MEC TDA30 W/ MEC 28/44 28 52 System Speed Dial 1000/tenant (8 tenants / system) 1000/system 1000/system Station Speed Dial 100 / extension

10 / extension 100 / extension 80 + 4000 80 80 + 1000 Hotel Bill 1000 0 1000 SMDR Buffer (calls) 200 200 200 Broadcasting Feature Yes No Yes Max. Extensions

Quick Dial VoIP Channel Card (DSP) VoIP Channel Card (DSP) This role of this card is to provide the necessary CODEC conversion when calling over IP via TDM. i.e. The DSP allows a TDM call (DLC, LCOT, BRI etc) to be routed over IP. It is the DSP which converts TDM <-> IP(G711, G729 etc) If you want to use the VoIP features, you need to install DSP4, DSP16 or DSP64. Trunk Ext. TDM IP : 49ch TSW VoIP DSP New MPR IP Trunk IP Ext. VoIP Channel Capacity - 1 NCP500 NCP1000

TDE100 /200 Maximum channel number of IP-Trunk(H.323/SIP) 8 32 32 Maximum number of IP-PT 40 64 64 Maximum number of SIP-Phone 32 64 128 Maximum channel number between Legacy side and IP side (IP TDM) 49 49

49 NB: If the ESVM on the ICMPR card is disabled by System Programming, you can increase ICMPRTDM channel from 49 53 VoIP Channel Capacity - 2 Outside Line Call -1 (IP Trunk Extension) Talking Party G711 G711 IP-Trunk IP-PT G711 G729 G729 G729 G711 G711 IP-Trunk SIP Ext. G711 G729 G729 G729 G711 IP-Trunk G729 Legacy Ext NCP500 NCP1000 TDE100/200 DSP DSP DSP DSP DSP DSP DSP DSP 4 16 64 4 16 64 16 64 8 8 8

8 32 32 32 32 3 8 8 3 12 32 12 32 2 8 8 2 8 32 8 32 8 8 8 8 32 32 32 32 3 8 8 3 12 32 12 32

2 8 8 2 8 32 8 32 8 8 8 8 32 32 32 32 3 8 8 3 12 32 12 32 [Restriction Key] DSP Capacity Max Number of TDM-IP Channels Max Number of IP-Trunks Max Number of Handsets.

VoIP Channel Capacity - 3 Outside Line Call -2 (Legacy CO IP-Extension) Talking Party Legacy CO IP-PT Legacy CO SIP Ext G711 G729 G711 G729 NCP500 NCP1000 DSP DSP DSP DSP DSP DSP 4 16 64 4 16 64 16 40 40 16 49 49 4 16 40 4 16 49

16 32 32 16 49 49 4 16 32 4 16 49 TDE100/200 DSP DSP 16 64 49 49 16 49 49 49 16 49 [Restriction Key] DSP Capacity Max Number of TDM-IP Channels Max Number of IP-Trunks Max Number of

Handsets. VoIP Channel Capacity - 4 Extension to Extension Call Talking Party IP-PT P to P (*) IP-PT IP-PT IP Ext IP Ext P to P (*) SIP SIP P to P (*) SIP G711 IP-PT Legacy Ext G729 IP Ext Legacy Ext G711 SIP Legacy Ext G729 NCP500 NCP1000 TDE100/200 DSP DSP DSP DSP DSP DSP DSP DSP 4 16 64 4 16 64 16 64

20 20 20 32 32 32 32 32 16 16 16 32 32 32 64 64 16 16 16

32 32 32 64 64 16 4 16 4 40 16 32 16 40 40 32 32 16 4 16 4 49 16 49 16 49

49 49 49 49 16 49 16 49 49 49 49 (*): VoIP channel is not used for Peer to Peer mode [Restriction Key] DSP Capacity Max Number of TDM-IP Channels Max Number of IP-Trunks Max Number of Handsets. Activation Key for NCP Activation Key (Line Up) Activation Keys for Trunk and Extension Model NCS3104 NCS3201

NCS3208 NCS3508 NCS3716 Type 4 IP-Trunk (4ch H.323 IPGW or 4ch SIP-Trunk) 1-IP-PT / IP-Softphone combination 8-IP-PT / IP-Softphone combination 8 IP-PT 16 SIP Extension Activation Keys for CA and Enhanced Feature Model NCS2101 NCS2105 NCS2110 NCS2201 NCS2205 NCS2210 NCS2301 NCS3910 Type CA-Basic (1 User) CA-Basic (5 Users) CA-Basic (10 Users) CA-Pro (1 User) CA-Pro (5 Users) CA-Pro (10 Users) CA-Supervisor (1 User) Enhanced Feature Activation Key (Issue Activation key file) Issuing NCP Activation key procedure is the same as TDE100/200.

URL: https://eww.netreg.panasonic.co.jp/kms/ Activation Key -1 NCP Activation Key Status Screen. Activation Key -2 Current Activation Status Total number of channel or user. We can divide number of channels by channel base. Pre-Programmed Activation key User Purchased Activation key Activation Key (Activate Activation key file) -1 1- Connect the PCMC to the NCP and confirm the current activation status. PCMC PCC provides 10 days temporary activation key for all models.

Current Activation status Activation Key (Activate Activation key file) -2 2- Transfer activation key file to the NCP (SD Card) PCMC Activation key file 3- Open the Activation key display screen again, to activate key file. New Activation status Activation Key (Activate Activation key file) -3 When you install some kind of Activation Key, you do not need to change status of Virtual card. Type of Activation key V-card OUS-INS operation NCP500/1000 TDE100/200 IP-Trunk Need Need IPPT/IP-Softphone

Need Need IPPT No Need Need SIP Extension No Need Need Enhanced Feature No Need Need CA-Basic No Need N/A CA-Pro No Need N/A CA-Supervisor

No Need N/A New Features Software Enhancement Plan NCP500 TDE600 NCP1000 TDA30 TDA100 TDA600 TDE100 TDA200 TDE200 DSS BLF for Mobile Extension 1.0 (3.0) (5.0) (5.0) (?) (3.0) Transfer re-call to VM-Group. 1.0

2.0 (5.0) (5.0) (?) (3.0) Intercept for CallFWD to CO. 1.0 2.0 (5.0) (5.0) (?) (3.0) Busy-out Auto recovery function. 1.0 2.0 (5.0) (5.0) (?)

(3.0) Check-OUT not ready mode. 1.0 2.0 (5.0) (5.0) (?) (3.0) System error activates an external relay. 1.0 2.0 (5.0) (5.0) (?) (3.0) PRI CNIP 1.0

2.0 N/A (5.0) (?) (3.0) ( ) = Planed MPR version PC Maintenance Console for NCP500/1000 PCMC for NCP500/1000 Please use U-PCMC Ver. 4 Thank You Very Much For Your Attention We are Panasonic Family Modification 20080905-01 NCP500_1000 V1.0.ppt to 20080917-01 NCP500_1000 V1.0.ppt Page 40 : 32 tenants / system 8 tenants / system. 20080917-01 NCP500_1000 V1.0.ppt to 20080917-02 NCP500_1000 V1.0.ppt Page 22 : Delete 32 tenants / system

Recently Viewed Presentations

  • Grape Industry Benefits from ALS Research X-ray tomography

    Grape Industry Benefits from ALS Research X-ray tomography

    • Xylem vessels, tubes experience drought-induced breakage ... Trans-longitudinal section showing droplet details in four vessels at different stages of refilling (C), and the corresponding 3D volume rendering (D). Vessel on the far left shows evidence of failed refilling.
  • Presentation Title - Louisiana

    Presentation Title - Louisiana

    Certified Medication Attendant . Unlicensed personnel who administer certain medication to: Residents of intermediate care facilities & community homes operated by OCDD or funded through DHH. Individuals in programs/agencies contracting for services with DHH except acute care settings. LOUISIANA DEPARTMENT...
  • Tutorial 9 Securing and Enhancing Your Use of

    Tutorial 9 Securing and Enhancing Your Use of

    The most visible integrity threats have been from Trojan horses, viruses, and worms that attack computers and the programs they run. A Trojan horse is a small program hidden inside another program that causes harm when the user accesses or...
  • KBB: A Knowledge-Bundle Builder for Research Studies

    KBB: A Knowledge-Bundle Builder for Research Studies

    Wild fires are racing through unharvested wheat fields, the result of a Russian heat wave that has destroyed more than one-fifth of that country's wheat crop. In addition to causing the farmers considerable pain, the crop losses have caused wheat...
  • Career Up! Coach Up! Attitude The longer I

    Career Up! Coach Up! Attitude The longer I

    Attitude. The longer I live, the more I realize the impact of attitude on life. Attitude, to me, is more important than the past, than education, than money, than circumstances, than failures, than successes, than what other people think or...
  • Doing the Right Thing: Leadership Lessons from Enron

    Doing the Right Thing: Leadership Lessons from Enron

    Lee Bolman & Terry Deal October, 2006 Four images of leadership Analyst Caregiver Warrior Wizard Why wizards and warriors? We need warriors because conflict is universal and they help us face opponents who block us from winning We need wizards...
  • LEAD - Environmental Public Health Today

    LEAD - Environmental Public Health Today

    LEAD Valya Dessaure, Ph.D. student Walden University PH 8165-1 Instructor: Dr. Shana Morrell Spring Quarter, 2009
  • How to Analyze a Poem

    How to Analyze a Poem

    Find and analyze any imagery in the poem. Find and analyze any figurative language or other literary devices in the poem. Find and analyze the mood in the poem. Find and analyze the tone in the poem. PowerPoint Presentation Let's...