4. How to use my EZ-Guide on my TIER II combine and do Yield ...

4. How to use my EZ-Guide on my TIER II combine and do Yield ...

How to connect my EZ-Guide 500 to my TIER II combine and do Yield Mapping? Connecting the EZ-Guide 500 to the Data Logger Unit for GPS mapping Connect the EZ-Guide 500 to the Data Logger Unit for GPS mapping: TIER II combines The EZ-Guide 500 can be connected to the Data Logger Unit to provide GPS data for yield mapping. After logging the data, it is possible to produce maps with the desktop software. Use the following cables to connect the EZ-Guide 500 to the Data Logger Unit: female/female standard (straight-through) 9-pin gender adapter (source locally) 87302445 - 9-pin to 5-pin adapter 87363745 - 5-pin to 8-pin adapter Note: The 9-pin gender adapter must be installed between the EZ-Guide 500 lightbar and the 87302445 cable.

Configure the lightbar to output data in the following format: Data type: NMEA Data bits: 8 Parity: None (N) Stop bits: 1 Baud rate: 4800bps Hertz rate: 1hz NMEA Strings: GGA and VTG turned ON, all others turned OFF 2 How to connect my EZ-Guide 500 to my AFS600/Intelliview II Plus monitor

Connecting the EZ-Guide 500 to the AFS 600/ Intelliview II Plus display The color touch screen display features a 9-pin (DE9) serial connector. This connector is located on the bottom of the display,. In display software versions prior to 16, the serial connector is disabled and is not used for any purpose. In display software versions 16 and higher, the serial connector can be used to input a GPS signal into the AFS600/ Intelliview II Plus display. To use the serial connector for GPS input, follow the steps below: 1.Configure the receiver to output data in the following format: Data type: NMEA Data bits: 8 Parity: None (N) Stop bits: 1 Baud rate: 4800bps - 38,400bps (the color display works best with most receivers at 38,400bps)

Hertz rate: 1hz or 5hz NMEA Strings: GGA and VTG turned ON, all others turned OFF 2. Connect the EZ-Guide 500 to the display serial connector using a 9-pin data cable (87297613) . The EZ-Guide 500 must be powered separately, as the 9-pin serial connection cannot supply power to the receiver.) 3. Most devices require an additional ground to be able to transmit NMEA strings through the serial connector on the color display. The recommended method is to build a jumper harness where the ground (pin 5) of the serial port is connects to the ground wire (pin 14) on the 26-pin connector. 4. Power up the display and go to MAIN > TOOLBOX > GPS. 5. Set the GPS Connection Type to 'RS232B. The display is now configured to accept the signal from the EZ-Guide 500 through the 9-pin serial connector. If the receiver does not communicate with the display immediately, cycle power to the display and receiver. You can view the GPS signal status on the MAIN > DIAGNOSTICS > GPS screen.

Recently Viewed Presentations

  • St. joseph chamber of commerce - showme.org

    St. joseph chamber of commerce - showme.org

    St. joseph chamber of commerce. 2016. MEDC Conference at the Lake of the Ozarks. ... If given an opportunity to create 1,000 new jobs in their community, manufacturing tops the list. ... 1 is joining IBEW Local 124 in Kansas...
  • Implement with Intent - One Wild Counselor

    Implement with Intent - One Wild Counselor

    SAIG Groups (Social, Academic & Instructional) Problem-Solving Meetings. FABI. Classroom Lessons. Create Master schedule beginning of the year. Evaluate what components you will directly deliver, and. What strands can be delivered by someone else.
  • CAASPP Workshops - Alvord Unified School District

    CAASPP Workshops - Alvord Unified School District

    Each year the local educational agencies (LEAs) are required to notify parents or guardians of their pupil's participation in the CAASPP tests. In addition, LEAs are required to inform parents of their right to exempt their child from taking the...
  • GlobalWare Americas Help Desk

    GlobalWare Americas Help Desk

    Email support still available at [email protected] Hours of operation . 9:00AM to 8:00PM ET M-F . Coming Soon. Incidents available in ASK Travelport. Desktop View in ASK Travelport. Ask A Question in ASK Travelport
  • Macquarie Low Risk Equities

    Macquarie Low Risk Equities

    MACQUARIE SPECIALIST INVESTMENTS MACQUARIE FLEXI 100 TRUST - CLIENT PRESENTATION Presentation: This presentation is prepared by Macquarie Financial Products Management Limited ACN 095 135 694 AFSL 237847 (MFPML), the issuer of units in the Macquarie Flexi 100 Trust ARSN 129...
  • LA CLÁUSULA - edu.xunta.gal

    LA CLÁUSULA - edu.xunta.gal

    SINTAXIS FUNCIONAL BACHILLERATO DEP. DE LENGUA CASTELLANA 4. FINALES: Fui a verlo para explicarle mis motivos VAN INTRODUCIDAS POR LA PREPOSICIÓN PARA, POR LAS LOCUCIONES PREPOSITIVAS A FIN DE, CON VISTAS A, ETC. y, en ocasiones, por la conjunción que...
  • The Road to War Chapter 17

    The Road to War Chapter 17

    Wanted to reduce naval power of US, GB, & Japan specifically. US/GB =, Japan 60% of US, Fr/It 50% of Japan "Naval Holiday" not build ships for a specific time period. Kellogg Briand Pact: a pact that outlawed war, except...
  • PowerPoint 演示文稿 - 210.29.65.47:8001

    PowerPoint 演示文稿 - 210.29.65.47:8001

    Similarly, Prof. Wilson's classes are very interesting too. (The meaning of riveting is likely to be similar to interesting as indicated by similarly and too.) Text Study—Structure analysis Clue II: Antonyms Definition: An antonym is a word meaning the opposite...